Details

---

BUY FDPF770N15A https://www.utsource.net/itm/p/12610796.html

Parameter	Symbol	Value	Unit	Notes
Drain-Source Voltage	VDS	150	V	Maximum continuous drain-source voltage
Gate-Source Voltage	VGS	卤20	V	Maximum gate-source voltage
Continuous Drain Current	ID	70	A	At TC = 25掳C
Pulse Drain Current	ID(p)	140	A	tp = 10 渭s, IGS = 0 A, TC = 25掳C
Power Dissipation	PTOT	180	W	At TC = 25掳C
Junction Temperature	TJ	-55 to 150	掳C	Operating range
Storage Temperature	TSTG	-65 to 150	掳C	Storage range
Thermal Resistance (Junction to Case)	R胃JC	0.55	掳C/W	-
Total Gate Charge	QG	35	nC	VGS = 10 V, VDS = 100 V, ID = 70 A
Input Capacitance	Ciss	1500	pF	VDS = 100 V, f = 1 MHz
Output Capacitance	Coss	300	pF	VDS = 100 V, f = 1 MHz
Reverse Transfer Capacitance	Crss	180	pF	VDS = 100 V, f = 1 MHz
On-State Resistance	RDS(on)	0.018	惟	VGS = 10 V, ID = 70 A, TJ = 25掳C
Gate Threshold Voltage	VGS(th)	2 to 4	V	ID = 250 渭A, TJ = 25掳C
Turn-On Delay Time	td(on)	25	ns	VGS = 10 V, IG = 10 A, VDS = 100 V, IL = 50 A
Rise Time	tr	35	ns	VGS = 10 V, IG = 10 A, VDS = 100 V, IL = 50 A
Turn-Off Delay Time	td(off)	20	ns	VGS = -10 V, IG = -10 A, VDS = 100 V, IL = 50 A
Fall Time	tf	30	ns	VGS = -10 V, IG = -10 A, VDS = 100 V, IL = 50 A

Instructions:

1. Handling Precautions:

   • Avoid exposing the device to high temperatures or excessive mechanical stress.
   • Use proper ESD protection when handling the device.

2. Mounting:

   • Ensure good thermal contact between the device and the heatsink.
   • Use recommended torque for screw mounting to avoid damage.

3. Operation:

   • Do not exceed the maximum ratings listed in the table.
   • Ensure adequate cooling to maintain junction temperature within specified limits.

4. Testing:

   • Use appropriate test equipment and follow standard testing procedures.
   • Verify all connections and settings before applying power.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Follow recommended storage conditions to prevent degradation.

6. Soldering:

   • Use a soldering iron with a temperature not exceeding 300掳C.
   • Soldering time should not exceed 10 seconds per connection.

7. Troubleshooting:

   • Check for proper installation and connections.
   • Monitor temperature and current levels during operation.
   • Refer to the datasheet for detailed troubleshooting information.

(For reference only)