Details

---

BUY HFKM 012-1ZST-12VDC https://www.utsource.net/itm/p/12610799.html

Parameter	Value
Part Number	HFKM 012-1ZST-12VDC
Type	Relay
Coil Voltage	12V DC
Coil Power	120mW
Coil Resistance	120惟
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	10A @ 250VAC / 30VDC
Insulation Voltage	1000VAC RMS
Operating Temp.	-40掳C to +85掳C
Storage Temp.	-40掳C to +125掳C
Mechanical Life	10,000,000 cycles
Electrical Life	100,000 cycles (resistive load)
Terminal Type	Solder Lug
Mounting	PCB Mount
Dimensions	17.5mm x 12.5mm x 12.5mm
Weight	6g

Instructions:

1. Installation:

   • Ensure the relay is mounted on a suitable PCB or chassis.
   • Use the provided solder lugs for secure connections.
   • Avoid excessive heat during soldering to prevent damage to the relay.

2. Operation:

   • Apply the specified coil voltage (12V DC) to activate the relay.
   • Ensure the load connected to the relay contacts does not exceed the contact rating (10A @ 250VAC / 30VDC).

3. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay contacts with a non-abrasive cleaner if necessary.

4. Storage:

   • Store the relay in a dry, cool place within the specified storage temperature range (-40掳C to +125掳C).

5. Safety:

   • Do not exceed the insulation voltage (1000VAC RMS) to avoid electrical hazards.
   • Ensure proper grounding and isolation when handling high-voltage circuits.

6. Troubleshooting:

   • If the relay fails to operate, check the coil voltage and connections.
   • Verify that the load is within the contact rating.
   • Replace the relay if it shows signs of malfunction or physical damage.

(For reference only)