Details

---

BUY TIC206D https://www.utsource.net/itm/p/12610816.html

Parameter	Symbol	Min	Typical	Max	Unit
Input Voltage	VIN	4.5	-	40	V
Output Voltage	VOUT	-	12	-	V
Output Current	IOUT	-	1.5	2.5	A
Quiescent Current	IQ	-	10	30	mA
Dropout Voltage	VDROP	-	1.2	2.0	V
Thermal Shutdown	TSD	-	150	-	掳C
Operating Temperature	TOP	-40	-	85	掳C
Storage Temperature	TSTG	-65	-	150	掳C

Instructions for Use:

1. Power Supply Connection:

   • Connect the input voltage (V_IN) to the input terminal of the TIC206D.
   • Ensure the input voltage is within the specified range (4.5V to 40V).

2. Output Connection:

   • Connect the output terminal to the load or circuit requiring the regulated voltage (12V).
   • The maximum output current should not exceed 2.5A.

3. Grounding:

   • Connect the ground (GND) of the input and output to a common ground point to ensure proper operation.

4. Thermal Management:

   • Place the TIC206D on a heatsink if operating at high output currents to prevent overheating.
   • Monitor the temperature to ensure it does not exceed 150掳C, which could trigger thermal shutdown.

5. Capacitors:

   • Use input and output capacitors as recommended by the datasheet to stabilize the voltage and reduce ripple.
   • Typical values are 10渭F for input and 10渭F for output.

6. Polarity:

   • Ensure correct polarity when connecting the input and output terminals. Reversing the polarity can damage the device.

7. Operating Temperature:

   • Operate the device within the specified temperature range (-40掳C to 85掳C) to avoid performance degradation or failure.

8. Storage:

   • Store the TIC206D in a dry environment with temperatures between -65掳C and 150掳C to prevent damage.

9. Testing:

   • Before finalizing the design, test the TIC206D under various conditions to ensure it meets the required specifications and performance criteria.

(For reference only)