Details

---

BUY AD2S1210CSTZ https://www.utsource.net/itm/p/12610852.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	4.75	5	5.25	V
Reference Voltage	VREF	Operating	2.4		3.6	V
Power Consumption	IDD	All channels on		120		mA
Resolution			10		16	bits
Conversion Time	tconv	16-bit, 1 MSPS		1		μs
Interface			SPI
Temperature Range		Operating	-40		85	°C
Package Type			TSSOP

Instructions for AD2S1210CSTZ

1. Power Supply Configuration:

   • Ensure the supply voltage (VDD) is within the range of 4.75V to 5.25V.
   • The reference voltage (VREF) should be between 2.4V and 3.6V.

2. Pin Connections:

   • Connect the power supply pin (VDD) and ground (GND) properly.
   • Connect the reference voltage (VREF) to a stable voltage source within the specified range.

3. SPI Communication:

   • Use the SPI interface for communication with the device.
   • Configure the SPI settings according to the device’s requirements.

4. Resolution Setting:

   • Set the resolution as required using the appropriate configuration commands via the SPI interface. Options are available from 10 to 16 bits.

5. Conversion Timing:

   • For 16-bit resolution at 1 MSPS, ensure the conversion time is set to 1 microsecond.

6. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to +85°C to ensure reliable performance.

7. Package Handling:

   • Handle the TSSOP package carefully to avoid damage to pins and ensure proper soldering during installation.

For detailed specifications and advanced configurations, refer to the official datasheet provided by Analog Devices.

(For reference only)