Details

---

BUY HCPL-0611-000E https://www.utsource.net/itm/p/12610858.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 20 mA	-	1.2	1.5	V
Reverse Voltage	VR	IR = 1 渭A	-	-	5.5	V
Forward Current	IF	Continuous	-	-	50	mA
Peak Forward Current	IF(peak)	10% Duty Cycle	-	-	150	mA
Output Current (High Level)	IOH	VO = 4.5 V, TA = 25掳C	-	-	30	mA
Output Current (Low Level)	IOL	VO = 0.4 V, TA = 25掳C	8	15	-	mA
Isolation Voltage	VIORM	1 Minute, 50/60 Hz	-	-	3750	Vrms
Operating Temperature Range	TA	-	-40	-	105	掳C
Storage Temperature Range	TSTG	-	-55	-	125	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the power supply voltage is within the specified range to avoid damage.
   • Use a stable power source to maintain consistent operation.

2. Forward Current:

   • Do not exceed the maximum forward current (I_F) of 50 mA continuously.
   • For peak applications, ensure the duty cycle does not exceed 10% and the peak current does not exceed 150 mA.

3. Output Current:

   • When the output is high, the maximum current (I_OH) should not exceed 30 mA.
   • When the output is low, the minimum current (I_OL) should be at least 8 mA, with a typical value of 15 mA.

4. Isolation:

   • The device provides a high isolation voltage of up to 3750 V_rms for 1 minute at 50/60 Hz. Ensure proper insulation and handling to prevent electrical hazards.

5. Temperature:

   • Operate the device within the temperature range of -40掳C to 105掳C to ensure reliable performance.
   • Store the device in an environment between -55掳C and 125掳C to prevent degradation.

6. Mounting and Handling:

   • Handle the device with care to avoid mechanical stress or damage.
   • Follow recommended soldering profiles to prevent thermal damage during assembly.

7. Testing:

   • Before finalizing the design, conduct thorough testing under all expected operating conditions to ensure the device meets performance requirements.

8. Compliance:

   • Ensure the device complies with all relevant safety and regulatory standards for the intended application.

(For reference only)