Details

---

BUY SS24FL https://www.utsource.net/itm/p/12610860.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	-	3.6	V	Operating supply voltage
Standby Current	ISB	-	1	-	渭A	Current consumption in standby mode
Active Current	IOP	-	5	-	mA	Current consumption in active mode
Output Current	IOH	-	8	-	mA	Output high current
Output Voltage	VOH	-	3.3	-	V	Output high voltage
Input Voltage	VIH	-	2.4	-	V	Input high voltage
Operating Temp.	TOPR	-40	-	85	掳C	Operating temperature range
Storage Temp.	TSTG	-55	-	125	掳C	Storage temperature range

Instructions for SS24FL:

1. Power Supply Connection:

   • Connect the VDD pin to a power supply within the specified operating voltage range (2.7V to 3.6V).
   • Ensure that the ground (GND) pin is properly connected to the system ground.

2. Standby Mode Operation:

   • To minimize power consumption, ensure the device enters standby mode when not actively transmitting or receiving data.
   • In standby mode, the device consumes approximately 1渭A of current.

3. Active Mode Operation:

   • When the device is in active mode, it can consume up to 5mA of current.
   • Ensure adequate power supply and heat dissipation measures are in place during active operation.

4. Output Handling:

   • The output pins can source up to 8mA of current with an output voltage of 3.3V under typical conditions.
   • Ensure connected devices can handle this current and voltage level.

5. Input Signal Levels:

   • For proper recognition of input signals, ensure they meet the minimum input high voltage (VIH) requirement of 2.4V.

6. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C for reliable performance.
   • Store the device within the storage temperature range of -55掳C to 125掳C to avoid damage.

7. Handling Precautions:

   • Handle the SS24FL with care to prevent electrostatic discharge (ESD) damage.
   • Follow standard ESD protection practices when handling and installing the component.

(For reference only)