Details

---

BUY TC1015-3.3VCT713 https://www.utsource.net/itm/p/12610861.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VI	Operating	2.7	-	5.5	V
Output Voltage	VO	Fixed	-	3.3	-	V
Output Current (Max)	IO	Continuous	-	100	-	mA
Quiescent Current	IQ	VI = 5V	-	4	-	渭A
Dropout Voltage	VD	IO = 100mA	-	0.4	-	V
PSRR at 1kHz			-	60	-	dB
Line Regulation		VI: 2.7V to 5.5V	-	0.01	-	%/V
Load Regulation		IO: 0 to 100mA	-	0.01	-	%/mA

Instructions for Use:

1. Power Supply: Ensure the input voltage is within the specified range of 2.7V to 5.5V.
2. Output Configuration: The device provides a fixed output voltage of 3.3V. No external components are required for setting the output voltage.
3. Load Handling: The regulator can supply up to 100mA continuously. Ensure your load does not exceed this limit to avoid overheating or damage.
4. Quiescent Current: Keep in mind the quiescent current of 4渭A when considering battery life in low-power applications.
5. Dropout Voltage: With a dropout voltage of 0.4V at full load, ensure the input voltage remains at least 0.4V above the output voltage.
6. Noise Reduction: For optimal performance and noise reduction, place a 1渭F capacitor close to the input and output pins.
7. PCB Layout: Proper PCB layout practices should be followed, including short leads and adequate copper area for heat dissipation if necessary.

This table and set of instructions provide essential information for effectively using the TC1015-3.3VCT713 voltage regulator.

(For reference only)