Details

---

BUY AP112 https://www.utsource.net/itm/p/12610883.html

Below is the parameter table and instructions for the AP112 electronic component:

AP112 Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	Vcc	2.7	-	5.5	V
Output Current	Iout	-	300	500	mA
Quiescent Current	Iq	-	1.5	2.5	渭A
Dropout Voltage	Vdo	-	0.4	0.6	V
Shutdown Current	Isd	-	0.1	0.5	渭A
Operating Temperature	Toper	-40	-	85	掳C
Storage Temperature	Tstg	-55	-	150	掳C

AP112 Instructions

1. Supply Voltage (Vcc):

   • The AP112 operates within a supply voltage range of 2.7V to 5.5V. Ensure the input voltage is within this range to avoid damage to the device.

2. Output Current (Iout):

   • The typical output current is 300mA, with a maximum of 500mA. Do not exceed the maximum output current to prevent overheating or damage.

3. Quiescent Current (Iq):

   • The quiescent current is typically 1.5渭A and can go up to 2.5渭A. This low quiescent current makes the AP112 suitable for battery-powered applications.

4. Dropout Voltage (Vdo):

   • The dropout voltage is typically 0.4V and can go up to 0.6V. This low dropout voltage ensures efficient operation even at low input voltages.

5. Shutdown Current (Isd):

   • The shutdown current is typically 0.1渭A and can go up to 0.5渭A. Use the shutdown feature to reduce power consumption when the device is not in use.

6. Operating Temperature (Toper):

   • The operating temperature range is from -40掳C to 85掳C. Ensure the device is used within this temperature range to maintain reliable performance.

7. Storage Temperature (Tstg):

   • The storage temperature range is from -55掳C to 150掳C. Store the device in a dry and temperature-controlled environment to prevent damage.

8. Installation:

   • Solder the AP112 to the PCB using a temperature-controlled soldering iron. Avoid excessive heat and ensure proper alignment of the component.

9. Testing:

   • After installation, test the device under the specified operating conditions to ensure it meets the required performance parameters.

10. Handling:

    • Handle the AP112 with care to avoid static discharge and physical damage. Use appropriate ESD protection measures during handling and assembly.

By following these instructions, you can ensure the optimal performance and longevity of the AP112 component.

(For reference only)