Details

---

BUY P10NK80ZFP https://www.utsource.net/itm/p/12610915.html

Parameter	Symbol	Min	Typical	Max	Unit
Drain-Source Voltage	VDS	-	800	-	V
Gate-Source Voltage	VGS	-20	-	20	V
Continuous Drain Current	ID	-	10	-	A
Pulse Drain Current (tp = 10 渭s)	IDpeak	-	50	-	A
Total Power Dissipation	PTOT	-	125	-	W
Junction Temperature	TJ	-55	-	175	掳C
Storage Temperature	TSTG	-55	-	150	掳C
Thermal Resistance, Junction to Case	RthJC	-	0.4	-	掳C/W
Gate Charge	QG	-	110	-	nC
Input Capacitance	Ciss	-	1600	-	pF
Output Capacitance	Coss	-	360	-	pF
Reverse Transfer Capacitance	Crss	-	180	-	pF

Instructions for Use:

1. Mounting and Handling:

   • Handle the P10NK80ZFP with care to avoid damage to the leads and body.
   • Ensure that the mounting surface is clean and flat to maintain good thermal contact.

2. Thermal Management:

   • Use a heatsink or other cooling methods to manage the junction temperature within the specified limits.
   • Ensure proper thermal interface material (TIM) is used between the device and the heatsink for efficient heat dissipation.

3. Electrical Connections:

   • Connect the drain, source, and gate terminals correctly to avoid damage.
   • Use appropriate wire gauges and connectors to handle the current ratings.

4. Gate Drive:

   • Apply a gate voltage within the specified range to ensure reliable operation.
   • Use a gate resistor to control the switching speed and reduce EMI.

5. Overvoltage Protection:

   • Implement overvoltage protection circuits to prevent damage from transient voltages exceeding the maximum drain-source voltage.

6. Storage:

   • Store the device in a dry, cool environment to prevent moisture damage.
   • Avoid exposure to extreme temperatures and corrosive environments.

7. Testing:

   • Perform initial testing at low power levels to verify correct operation before applying full load conditions.
   • Regularly inspect the device for signs of wear or damage during operation.

8. Compliance:

   • Ensure that the device is used in compliance with all relevant safety and regulatory standards.

(For reference only)