Details

---

BUY 20JL2C. https://www.utsource.net/itm/p/12610945.html

Parameter	Description	Value
Part Number	Full Part Number	20JL2C
Type	Device Type	Relay
Contact Form	Contact Configuration	SPDT
Coil Voltage	Operating Voltage of Coil	24VDC
Coil Current	Operating Current of Coil	35mA
Contact Rating	Maximum Switching Capacity	10A @ 250VAC
Insulation Resistance	Minimum Insulation Resistance	100M惟 at 500VDC
Dielectric Strength	Dielectric Withstand Voltage	1500VAC for 1 minute
Operating Temperature	Operating Temperature Range	-40掳C to +85掳C
Storage Temperature	Storage Temperature Range	-40掳C to +125掳C
Mechanical Life	Mechanical Operations (Min)	10,000,000 cycles
Electrical Life	Electrical Operations (Min)	100,000 cycles
Weight	Weight of Relay	10g
Dimensions	Dimensions (L x W x H)	17.5mm x 12.5mm x 10.5mm

Instructions for Use:

1. Installation:

   • Ensure the relay is mounted on a flat, stable surface.
   • Use appropriate mounting hardware to secure the relay.

2. Wiring:

   • Connect the coil terminals to the control circuit using the specified coil voltage.
   • Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as required.

3. Operation:

   • Apply the rated coil voltage to energize the relay.
   • The NO contact will close and the NC contact will open when the relay is energized.
   • When the coil voltage is removed, the contacts will return to their default positions.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a soft, dry cloth if necessary.

5. Safety:

   • Do not exceed the maximum ratings specified in the parameter table.
   • Ensure proper grounding and insulation to prevent electrical hazards.
   • Avoid operating the relay in environments with excessive dust, moisture, or corrosive gases.

(For reference only)