Details

---

BUY G5SB-1-48VDC https://www.utsource.net/itm/p/12610955.html

Parameter	Description
Type	Relay Module
Model	G5SB-1-48VDC
Coil Voltage	48V DC
Coil Power Consumption	0.36W (7.5mA)
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	5A, 250V AC / 30V DC
Insulation Resistance	100M惟 or more (500V DC)
Dielectric Strength	2500V AC for 1 minute
Contact Resistance	100m惟 or less (initial)
Mechanical Life	10 million operations (at no load)
Electrical Life	100,000 operations (resistive load)
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +85掳C
Humidity	5% to 95% RH (non-condensing)
Weight	3g (approx.)

Instructions:

1. Installation:

   • Ensure the relay is installed in a well-ventilated area to prevent overheating.
   • Mount the relay on a flat surface using the provided mounting holes.

2. Wiring:

   • Connect the coil terminals to the 48V DC power supply.
   • Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as required.

3. Operation:

   • When the coil is energized, the common contact will switch from the normally closed (NC) position to the normally open (NO) position.
   • When the coil is de-energized, the common contact will return to the normally closed (NC) position.

4. Maintenance:

   • Regularly inspect the relay for any signs of wear or damage.
   • Ensure the contacts are clean and free from corrosion.

5. Safety:

   • Do not exceed the rated voltage and current for the coil and contacts.
   • Use appropriate fuses or circuit breakers to protect the relay and connected circuits.
   • Follow all local electrical codes and safety regulations.

(For reference only)