Details

---

BUY OA5611.48/2513L1/61 https://www.utsource.net/itm/p/12610967.html

Parameter	Value	Unit
Part Number	OA5611.48/2513L1/61	-
Type	Optical Isolator	-
Forward Voltage (Vf)	1.2	V
Reverse Voltage (Vr)	5	V
Forward Current (If)	20	mA
Peak Forward Current	100	mA
Reverse Current (Ir)	100	nA
Isolation Voltage	2500	Vrms
Insulation Resistance	100	M惟
Operating Temperature	-40 to +85	掳C
Storage Temperature	-55 to +125	掳C
Package Type	DIP-4	-
Lead Pitch	2.54	mm
Lead Length	4.5	mm
Body Dimensions	7.6 x 5.1 x 3.9	mm

Instructions:

1. Mounting:

   • Ensure that the leads are not bent sharply close to the body.
   • Use a temperature-controlled soldering iron to avoid thermal shock.
   • Soldering temperature should not exceed 260掳C for more than 10 seconds.

2. Handling:

   • Handle with care to avoid mechanical stress on the leads and body.
   • Avoid exposing the device to excessive humidity or corrosive environments.

3. Electrical Connection:

   • Connect the forward current (If) to the appropriate circuit ensuring it does not exceed 20mA continuously.
   • Ensure the reverse voltage (Vr) is kept below 5V to prevent damage.
   • The peak forward current should not exceed 100mA to avoid overheating.

4. Testing:

   • Test the device under controlled conditions to ensure it meets the specified parameters.
   • Use a multimeter to check the forward and reverse characteristics.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use to protect from static discharge.

6. Safety:

   • Always follow proper electrical safety procedures when handling and testing the device.
   • Use appropriate personal protective equipment (PPE) as needed.

(For reference only)