Details

---

BUY ZXMP10A13FTA https://www.utsource.net/itm/p/12610985.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.7	-	5.5	V	Operating input voltage range
Output Voltage	VOUT	1.0	-	3.3	V (adj.)	Adjustable output voltage
Output Current	IOUT	-	1.0	1.5	A	Continuous output current
Quiescent Current	IQ	-	20	40	渭A	Quiescent current at no load
Dropout Voltage	VD	-	120	200	mV	Dropout voltage at IOUT = 1.5A
Load Regulation	-	-	1	2	%	Change in output voltage with varying load
Line Regulation	-	-	0.1	0.5	%/V	Change in output voltage with varying input
Ripple Rejection	-	60	70	80	dB	Ability to reject input ripple
Thermal Shutdown	TSD	-	-	160	掳C	Temperature at which the device shuts down
Operating Temperature	TOPR	-40	-	125	掳C	Operating temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Storage temperature range

Instructions for Use

1. Input Voltage:

   • Ensure the input voltage is within the specified range (2.7V to 5.5V) to avoid damage to the device.

2. Output Voltage:

   • The output voltage can be adjusted using external resistors. Refer to the datasheet for specific resistor values to achieve the desired output voltage.

3. Output Current:

   • The device can provide a continuous output current up to 1.5A. Ensure the load does not exceed this limit to prevent overheating or damage.

4. Quiescent Current:

   • The quiescent current is typically around 20渭A and should be considered when designing low-power systems.

5. Dropout Voltage:

   • The dropout voltage is the minimum difference between the input and output voltages required to maintain regulation. It is typically 120mV at full load.

6. Load Regulation:

   • The output voltage may vary by up to 2% with changes in load. This is within typical specifications for linear regulators.

7. Line Regulation:

   • The output voltage may vary by up to 0.5% per volt change in input voltage. This is important for maintaining stable output under varying input conditions.

8. Ripple Rejection:

   • The device has good ripple rejection, typically 70dB, which helps in filtering out input voltage noise.

9. Thermal Shutdown:

   • The device will automatically shut down if the junction temperature exceeds 160掳C to prevent damage. Ensure adequate heat dissipation for high current applications.

10. Operating and Storage Temperature:

    • The device can operate over a wide temperature range (-40掳C to 125掳C) and can be stored between -65掳C and 150掳C.

11. Mounting and Handling:

    • Handle the device with care to avoid static damage. Follow standard ESD precautions during assembly and handling.

12. PCB Layout:

    • Ensure proper PCB layout to minimize parasitic effects and improve thermal performance. Place the device close to the load and use short, wide traces for power connections.

(For reference only)