Details

---

BUY OP284F https://www.utsource.net/itm/p/12610987.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	2.7	-	5.5	V
Quiescent Current	IQ	-	100	200	渭A	VCC = 5V, No Load
Input Offset Voltage	VIO	-	5	25	渭V	VCC = 5V, TA = 25掳C
Input Bias Current	IB	-	2	10	nA	VCC = 5V, TA = 25掳C
Input Voltage Range	VI	0	-	VCC - 1.5	V	VCC = 5V, TA = 25掳C
Output Voltage Swing	VOUT	0.1	-	VCC - 0.1	V	RL = 10k惟, VCC = 5V, TA = 25掳C
Slew Rate	SR	-	0.5	1.0	V/渭s	VCC = 5V, TA = 25掳C
Common-Mode Rejection Ratio	CMRR	80	-	100	dB	VCC = 5V, TA = 25掳C, f = 60Hz
Power Supply Rejection Ratio	PSRR	80	-	100	dB	VCC = 5V, TA = 25掳C, f = 1kHz
Bandwidth	f-3dB	-	1.0	1.5	MHz	VCC = 5V, TA = 25掳C, G = +1
Gain Bandwidth Product	GBP	-	1.0	1.5	MHz	VCC = 5V, TA = 25掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.7V to 5.5V.
   • Connect the positive supply to V_CC and the negative supply to ground (GND).

2. Input Signals:

   • The input voltage should not exceed the range from 0V to V_CC - 1.5V to avoid damage or incorrect operation.
   • Use appropriate biasing techniques to ensure the input signals stay within the specified range.

3. Output Configuration:

   • The output can swing from 0.1V to V_CC - 0.1V when connected to a 10k惟 load.
   • For optimal performance, ensure the load resistance is within the recommended range.

4. Temperature Considerations:

   • The device is designed to operate at a typical ambient temperature of 25掳C. Performance may vary outside this range.
   • Refer to the datasheet for temperature coefficients and derating curves if operating in extreme temperatures.

5. Stability and Compensation:

   • The OP284F is internally compensated for unity gain stability.
   • For higher gain applications, external compensation may be necessary to maintain stability.

6. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store in a dry environment and follow ESD (Electrostatic Discharge) precautions during handling.

7. Testing and Troubleshooting:

   • Before testing, ensure all connections are correct and power supplies are stable.
   • Use a multimeter or oscilloscope to verify the input and output voltages.
   • If the device does not function as expected, check for common issues such as incorrect power supply, short circuits, or damaged components.

(For reference only)