Details

---

BUY SC1565I5M-1.8TRT https://www.utsource.net/itm/p/12610995.html

Parameter	Value	Unit
Part Number	SC1565I5M-1.8TRT
Package Type	SOT-23
Operating Voltage (VDD)	1.8	V
Output Current	500	mA
Quiescent Current	2	μA
Dropout Voltage	170	mV
Load Regulation	±1	%
Line Regulation	±1	%
PSRR at 1kHz	58	dB
Operating Temperature	-40 to +85	°C
Storage Temperature	-65 to +150	°C

Instructions:

1. Installation:

   • Ensure that the operating voltage and current requirements of the device are met.
   • Follow proper PCB layout guidelines to ensure optimal performance, especially regarding the placement of input and output capacitors.

2. Capacitors:

   • Use a 1μF ceramic capacitor for both input and output to stabilize the regulator.
   • Place these capacitors as close as possible to the device’s VIN and VOUT pins.

3. Thermal Considerations:

   • The device is designed to operate within a specified temperature range. Ensure adequate heat dissipation if operating near the upper temperature limit.

4. Power Supply:

   • Connect the power supply carefully to avoid any transient spikes which could damage the regulator.

5. Testing:

   • After installation, verify the output voltage and current regulation under various load conditions to ensure stability and correct operation.

6. Handling:

   • Handle with care to prevent electrostatic discharge (ESD) damage. Use appropriate ESD protection measures during handling and installation.

(For reference only)