Details

---

BUY 2SD716 https://www.utsource.net/itm/p/12611006.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Collector-Emitter Voltage	VCE	-	-	80	V
Collector-Base Voltage	VCB	-	-	80	V
Emitter-Base Voltage	VEB	-	-	5	V	Reverse
Collector Current	IC	-	1.5	3	A	Continuous
Collector Current (Pulse)	IC(P)	-	3	6	A	Pulse Width ≤ 300 μs
Power Dissipation	PT	-	-	65	W	TA = 25°C
Operating Temperature	TOP	-55	-	150	°C
Storage Temperature	TS	-65	-	150	°C
Transition Frequency	fT	-	400	600	MHz
Base-Emitter Saturation Voltage	VBE(sat)	1.2	1.8	2.2	V	IC = 1.5 A, IB = 150 mA
Collector-Emitter Saturation Voltage	VCE(sat)	0.7	1.2	1.5	V	IC = 1.5 A, IB = 150 mA
Current Gain (DC)	hFE	20	70	150	-	IC = 1.5 A, VCE = 5 V

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to maintain the junction temperature within the specified limits.
   • Use recommended mounting torque for screws to avoid damage to the transistor.

2. Biasing:

   • Ensure that the base-emitter voltage (V_BE) is within the specified range to prevent excessive current and potential damage.
   • Use appropriate biasing circuits to maintain stable operation over temperature variations.

3. Current Limiting:

   • Implement current limiting resistors or other protection mechanisms to prevent the collector current from exceeding the maximum ratings.
   • For pulse applications, ensure that the pulse width and frequency do not exceed the specified limits.

4. Thermal Management:

   • Monitor the operating temperature and use thermal management techniques such as heatsinks or cooling fans if necessary.
   • Avoid operating the device at temperatures beyond the specified range to prevent thermal runaway.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Handle with care to avoid mechanical stress or damage to the leads.

6. Testing:

   • Use appropriate test equipment and procedures to verify the performance parameters of the device.
   • Follow safety guidelines when handling high-voltage and high-current circuits.

7. Environmental Considerations:

   • The device is sensitive to electrostatic discharge (ESD). Use ESD protection measures during handling and installation.
   • Comply with all environmental regulations regarding disposal and recycling of electronic components.

(For reference only)