Details

---

BUY TYPE DH2TU 24VDC https://www.utsource.net/itm/p/12611022.html

Parameter	Specification
Type	DH2TU
Voltage	24 VDC
Current Consumption	100 mA (max)
Operating Temperature	-25掳C to +70掳C
Storage Temperature	-40掳C to +85掳C
Humidity	5% to 95% RH (non-condensing)
Input Signal	NPN/PNP, 3 to 24 VDC
Output Signal	Relay Output (SPDT)
Relay Contact Rating	5 A @ 250 VAC, 3 A @ 30 VDC
Response Time	10 ms (max)
Protection	Reverse Polarity, Overload
Mounting	DIN Rail
Certifications	CE, UL, cUL, RoHS

Instructions

1. Power Supply:

   • Connect the 24 VDC power supply to the designated terminals.
   • Ensure the power supply is stable and within the specified range.

2. Input Connection:

   • Connect the input signal (NPN/PNP) to the appropriate terminals.
   • Verify that the input voltage is within the acceptable range (3 to 24 VDC).

3. Output Connection:

   • Connect the load to the relay output terminals (SPDT).
   • Ensure the load current does not exceed the relay contact rating (5 A @ 250 VAC, 3 A @ 30 VDC).

4. Mounting:

   • Mount the device on a standard 35 mm DIN rail.
   • Ensure proper spacing for heat dissipation and easy access for connections.

5. Environmental Conditions:

   • Operate the device within the specified temperature and humidity ranges.
   • Avoid exposure to condensation or corrosive environments.

6. Testing:

   • After installation, test the device to ensure it operates correctly.
   • Check for any signs of overheating or unusual behavior.

7. Maintenance:

   • Regularly inspect the device for any physical damage or wear.
   • Clean the device as needed, ensuring it is powered off during cleaning.

8. Troubleshooting:

   • If the device fails to operate, check the power supply and input signals.
   • Refer to the user manual for detailed troubleshooting steps.

9. Safety:

   • Always disconnect the power before performing any maintenance or repairs.
   • Follow all safety guidelines and regulations when handling electrical components.

(For reference only)