Details

---

BUY CY7C68013A-100AC https://www.utsource.net/itm/p/12611028.html

Parameter Name	Description	Value
Part Number	Device Part Number	CY7C68013A-100AC
Package Type	Package Type	LQFP-56
Operating Temperature	Operating Temperature Range	-40掳C to +85掳C
Supply Voltage (VCC)	Supply Voltage Range	3.0V to 3.6V
I/O Voltage (VIO)	I/O Voltage Range	1.425V to 3.6V
USB Version	USB Standard Compliance	USB 2.0 Full Speed
Maximum Clock Frequency	Maximum Clock Frequency (fCY)	48 MHz
Internal RAM Size	Internal RAM Size	512 bytes
External Bus Interface	External Bus Interface Support	8-bit, 16-bit, or 32-bit
Endpoints	Number of Endpoints	4 (2 IN, 2 OUT)
FIFO Size	FIFO Size per Endpoint	512 bytes
Programmable GPIOs	Number of Programmable General Purpose I/O Pins	16
USB Transceiver	Integrated USB Transceiver	Yes
USB Power Consumption	USB Power Consumption (Typical)	150 mA
Program Memory	Program Memory Size	64 KB
Data Memory	Data Memory Size	2 KB
Bootloader	Built-in Bootloader	Yes
Programming Interface	Programming Interface	SPI, I2C, UART
Operating Modes	Operating Modes	Slave FIFO, Isochronous, Bulk
ESD Protection	ESD Protection Level	HBM 卤2 kV, MM 卤1 kV
RoHS Compliance	RoHS Compliance	Yes

Instructions for Using CY7C68013A-100AC

1. Power Supply:

   • Ensure that the supply voltage (VCC) is within the range of 3.0V to 3.6V.
   • The I/O voltage (VIO) should be between 1.425V and 3.6V.

2. Clock Configuration:

   • The device supports a maximum clock frequency of 48 MHz. Use an external crystal or oscillator to provide the clock signal.

3. USB Configuration:

   • Connect the USB D+ and D- lines to the appropriate pins on the device.
   • Ensure that the USB power consumption does not exceed 150 mA.

4. GPIO Configuration:

   • Configure the 16 programmable GPIO pins as required for your application. These can be used for various functions such as data lines, control signals, or status indicators.

5. FIFO Management:

   • Each endpoint has a 512-byte FIFO buffer. Manage the FIFOs using the provided registers and commands to handle data transfer efficiently.

6. Programming:

   • Use the SPI, I2C, or UART interface to program the device. The built-in bootloader simplifies the programming process.
   • Refer to the device datasheet for specific programming commands and protocols.

7. Operating Modes:

   • The device supports multiple operating modes including Slave FIFO, Isochronous, and Bulk. Choose the mode that best fits your application requirements.

8. ESD Protection:

   • Handle the device with care to avoid damage from electrostatic discharge. Follow standard ESD handling procedures.

9. RoHS Compliance:

   • The device is RoHS compliant, ensuring it meets environmental and safety standards.

For detailed information and specific register settings, refer to the CY7C68013A-100AC datasheet and application notes provided by Cypress Semiconductor.

(For reference only)