Details

---

BUY TC4420CPA DIP-8 https://www.utsource.net/itm/p/12611043.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	4.5		18	V
Input High Level Voltage	VIH	IO = 0mA, TA = 25掳C	2.0		VCC	V
Input Low Level Voltage	VIL	IO = 0mA, TA = 25掳C	0		0.8	V
Output High Level Voltage	VOH	IO = -300mA, TA = 25掳C	2.4		VCC-0.9	V
Output Low Level Voltage	VOL	IO = 300mA, TA = 25掳C	0		0.4	V
Propagation Delay Time	tpd	VCC = 5V, TA = 25掳C		22		ns
Quiescent Current	IQ	No load, TA = 25掳C		6		mA

Instructions for TC4420CPA DIP-8:

1. Power Supply Connection:

   • Connect the supply voltage (VCC) to pin 8.
   • Ground (GND) should be connected to pin 4.

2. Input Signals:

   • Apply input signals to pins 1 and 5. Ensure that the input voltages comply with the specified VIH and VIL levels.

3. Output Connections:

   • Outputs are available on pins 2 and 6. Make sure to account for the output voltage levels (VOH and VOL) when connecting loads.

4. Handling Static Electricity:

   • The device is sensitive to static electricity; handle it with care and use appropriate anti-static measures.

5. Operating Temperature:

   • Ensure the ambient temperature (TA) stays within the operational range to maintain performance specifications.

6. Mounting and Orientation:

   • Verify the correct orientation of the DIP-8 package during mounting to avoid misconnections.

7. Storage and Handling:

   • Store in a dry environment and follow proper handling procedures to prevent damage.

(For reference only)