Details

---

BUY AOZ1236QI-02 https://www.utsource.net/itm/p/12611050.html

Parameter	Symbol	Test Conditions	Min	Typ	Max	Unit
Input Voltage	VIN		2.7		5.5	V
Output Voltage	VOUT	Adjustable		0.8	3.3	V
Quiescent Current	IQ	VIN = 5V, IOUT = 0mA		40		渭A
Shutdown Current	ISD	VIN = 5V, SHDN = 0V		1		渭A
Output Current Limit	ILIM	VIN = 5V, VOUT = 3.3V		600		mA
Dropout Voltage	VDROPOUT	IOUT = 300mA		250		mV
Operating Junction Temperature	TJOP		-40		125	掳C

Instructions for AOZ1236QI-02

1. Input Voltage (VIN):

   • Ensure the input voltage is within the range of 2.7V to 5.5V.

2. Output Voltage (VOUT):

   • The output voltage can be adjusted from 0.8V to 3.3V using external resistors. Refer to the datasheet for resistor values.

3. Quiescent Current (IQ):

   • The quiescent current is typically 40渭A when the input voltage is 5V and there is no load on the output.

4. Shutdown Current (ISD):

   • When the shutdown pin (SHDN) is pulled low (0V), the device enters a low-power state with a typical shutdown current of 1渭A.

5. Output Current Limit (ILIM):

   • The device can provide up to 600mA of output current under the specified conditions.

6. Dropout Voltage (VDROPOUT):

   • At an output current of 300mA, the dropout voltage is typically 250mV.

7. Operating Junction Temperature (TJOP):

   • Ensure that the operating junction temperature remains between -40掳C and 125掳C to avoid damage or malfunction.

8. Installation:

   • Place the device in a well-ventilated area to ensure proper heat dissipation.
   • Follow the recommended layout guidelines provided in the datasheet for optimal performance.

9. Handling:

   • Handle with care to prevent damage to the pins and body of the component.
   • Use appropriate anti-static precautions during handling and installation.

For detailed design considerations and further specifications, refer to the full datasheet of the AOZ1236QI-02.

(For reference only)