Details

---

BUY C3200-GR https://www.utsource.net/itm/p/12611104.html

Parameter	Description
Part Number	C3200-GR
Type	Silicon Carbide (SiC) MOSFET
VDS (Max)	1200 V
ID (Max)	3200 A
RDS(on)	4.5 m惟 (Typical at 25掳C, VGS = 15 V)
Power Dissipation	240 kW (Continuous at TC = 25掳C)
Package Type	D2PAK-7 (TO-263-7L)
Operating Temperature	-55掳C to +175掳C
Storage Temperature	-55掳C to +175掳C
Gate Charge (QG)	450 nC (Typical at VDS = 800 V, ID = 3200 A)
Input Capacitance (Ciss)	1500 pF (Typical at VDS = 800 V, f = 1 MHz)
Output Capacitance (Coss)	150 pF (Typical at VDS = 800 V, f = 1 MHz)
Reverse Transfer Capacitance (Crss)	120 pF (Typical at VDS = 800 V, f = 1 MHz)
Thermal Resistance (R胃JC)	0.015 K/W (Typical)
Switching Frequency	Up to 100 kHz

Instructions for Use

1. Handling Precautions:

   • Handle the device with care to avoid mechanical damage.
   • Use ESD protection to prevent electrostatic discharge damage.

2. Mounting:

   • Ensure proper thermal management by using a heatsink or cooling system.
   • Apply thermal paste between the device and the heatsink for better heat dissipation.

3. Biasing:

   • Apply a gate-to-source voltage (V_GS) of 15 V to turn the MOSFET on.
   • Apply a gate-to-source voltage (V_GS) of 0 V or less to turn the MOSFET off.

4. Operating Conditions:

   • Do not exceed the maximum ratings specified in the parameter table.
   • Ensure that the operating temperature is within the specified range to avoid thermal runaway.

5. Testing:

   • Use a high-voltage tester to verify the insulation resistance between the drain and source.
   • Test the R_DS(on) to ensure the device is functioning correctly.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Keep the device in its original packaging until ready for use to protect against static discharge.

7. Soldering:

   • Use a controlled soldering process to avoid overheating the device.
   • Follow the recommended soldering profile provided by the manufacturer.

8. Safety:

   • Always follow safety guidelines when handling high-voltage and high-current circuits.
   • Use appropriate personal protective equipment (PPE) when working with electrical components.

(For reference only)