Details

---

BUY TL082ACDT https://www.utsource.net/itm/p/12611124.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Supply Voltage	VCC	-16	-	16	V	Dual Supply
Supply Voltage (Single)	VCC	0	-	32	V	Single Supply
Input Voltage Range	VIN	VEE + 1.5	-	VCC - 1.5	V
Output Voltage Swing	VOUT	VEE + 2	-	VCC - 2	V
Input Offset Voltage	VIO	-	5	-	渭V
Input Bias Current	IB	-	50	-	nA
Input Offset Current	IOS	-	10	-	nA
Slew Rate	SR	-	13	-	V/渭s
Bandwidth	fT	-	4 MHz	-
Gain Bandwidth Product	GBP	-	4 MHz	-
Common Mode Rejection Ratio	CMRR	-	90	-	dB
Power Supply Rejection Ratio	PSRR	-	90	-	dB
Quiescent Current	IQ	-	1.7	-	mA	Per Amplifier

Instructions for Using TL082ACDT

1. Supply Voltage:

   • For dual supply operation, use 卤16V.
   • For single supply operation, use up to 32V.

2. Input Voltage Range:

   • Ensure input voltages are within V_EE + 1.5V to V_CC - 1.5V to avoid damage or incorrect operation.

3. Output Voltage Swing:

   • The output voltage swing is limited to V_EE + 2V to V_CC - 2V. Design circuits to accommodate these limits.

4. Biasing:

   • Use appropriate biasing techniques to ensure the inputs are within the common mode range and the outputs can swing as needed.

5. Slew Rate:

   • The slew rate is 13 V/渭s. Avoid signals with faster rise times to prevent distortion.

6. Stability:

   • Use external compensation if necessary to ensure stability, especially at high frequencies.

7. Power Supply Decoupling:

   • Place decoupling capacitors close to the power supply pins to reduce noise and improve performance.

8. Temperature Range:

   • The TL082ACDT is designed for commercial temperature ranges (-40掳C to 85掳C). Ensure the operating environment stays within these limits.

9. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components.

10. Testing:

    • Before finalizing the design, test the circuit under various conditions to ensure it meets the required specifications.

(For reference only)