Details

---

BUY BA33BCD https://www.utsource.net/itm/p/12611147.html

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	Vcc	4.5	-	5.5	V
Output Current	Iout	-	200	-	mA
Operating Temperature	Topr	-40	-	85	掳C
Storage Temperature	Tstg	-55	-	150	掳C
Quiescent Current	Iq	-	1.5	-	mA
Output Voltage	Vout	4.5	5.0	5.5	V
Dropout Voltage	Vdo	-	0.2	-	V

Instructions for Use:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 4.5V to 5.5V to avoid damage to the device.

2. Output Current (Iout):

   • The maximum output current is 200mA. Do not exceed this limit to prevent overheating and potential failure.

3. Operating Temperature (Topr):

   • The device is designed to operate within the temperature range of -40掳C to 85掳C. Ensure the ambient temperature does not exceed these limits.

4. Storage Temperature (Tstg):

   • When storing the device, keep it within the temperature range of -55掳C to 150掳C to maintain its integrity.

5. Quiescent Current (Iq):

   • The typical quiescent current is 1.5mA. This is the current consumed by the device when no load is applied.

6. Output Voltage (Vout):

   • The output voltage will be regulated to 5.0V, with a tolerance of 卤0.5V (4.5V to 5.5V).

7. Dropout Voltage (Vdo):

   • The dropout voltage is typically 0.2V. This is the minimum difference between the input and output voltages required to maintain regulation.

Additional Notes:

• Capacitors:
  • Use appropriate capacitors on the input and output to ensure stability. Typically, a 10渭F capacitor on the input and a 1渭F capacitor on the output are recommended.
• PCB Layout:
  • Ensure good thermal management by providing adequate copper area for heat dissipation if operating at high currents.
• Handling:
  • Handle the device with care to avoid static discharge, which can damage sensitive components. Use proper ESD protection measures.

(For reference only)