Details

---

BUY AD8418ABRMZ https://www.utsource.net/itm/p/12611150.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vsupply	2.7	-	5.5	V	Operating supply voltage range
Input Common-Mode Voltage	Vcm	0	-	Vsupply-1.2	V	Input common-mode voltage range
Differential Input Voltage	Vid	-200	-	200	mV	Maximum differential input voltage
Output Voltage Swing	Vout	0	-	Vsupply-1.2	V	Output voltage swing
Bandwidth (Small Signal)	fBW	-	800	-	kHz	Small signal bandwidth
Quiescent Current	IQ	-	300	-	渭A	Supply current in normal operation
Power-Down Current	IPD	-	1	-	渭A	Supply current in power-down mode
CMRR	CMRR	-	86	-	dB	Common-mode rejection ratio
PSRR	PSRR	-	86	-	dB	Power supply rejection ratio
Input Offset Voltage	Vos	-	200	-	渭V	Input offset voltage
Input Bias Current	IB	-	1	-	nA	Input bias current

Instructions for Using AD8418ABRMZ:

1. Power Supply Configuration:

   • Ensure the supply voltage is within the specified range of 2.7V to 5.5V.
   • Connect the power supply pins to a stable voltage source and include appropriate decoupling capacitors near the device.

2. Input Signal Connection:

   • Connect the differential input signals to the IN+ and IN- pins.
   • Ensure that the input common-mode voltage remains within the specified range relative to the supply voltage.

3. Output Configuration:

   • The output can be connected to subsequent stages or directly to a load, depending on the application.
   • Ensure the output voltage does not exceed the supply voltage minus 1.2V.

4. Power-Down Mode:

   • To enter power-down mode, set the shutdown pin to a low state.
   • In this mode, the quiescent current drops significantly to about 1渭A.

5. Grounding and Layout Considerations:

   • Proper grounding and layout practices are critical for minimizing noise and ensuring accurate performance.
   • Keep analog and digital grounds separate and connect them at a single point close to the device.

6. Handling Electrostatic Discharge (ESD):

   • The device is sensitive to ESD; handle with care and use appropriate ESD protection measures during handling and installation.

7. Thermal Management:

   • Although the device has low power consumption, ensure adequate heat dissipation if used in high ambient temperature environments.

(For reference only)