Details

---

BUY MB87020PF-G-BND https://www.utsource.net/itm/p/12611180.html

Parameter	Description	Value	Unit
Device Name	Microcontroller	MB87020PF-G-BND	-
Package Type	Package Style	QFP-44	-
Operating Voltage (Vcc)	Supply voltage range	2.7 to 5.5	V
Operating Temperature	Temperature range for operation	-40 to +85	掳C
Flash Memory	Size of on-chip flash memory	128	KB
RAM	Size of on-chip RAM	8	KB
Clock Frequency	Maximum clock frequency	20	MHz
I/O Pins	Number of Input/Output pins	36	-
Communication Interfaces	Supported communication protocols	UART, SPI, I2C	-
ADC Channels	Number of Analog-to-Digital Converter channels	10	-
Timer Channels	Number of timer channels	6	-
Watchdog Timer	Availability of watchdog timer	Yes	-

Instructions for Use

1. Power Supply Setup:

   • Ensure the supply voltage is within the specified range of 2.7V to 5.5V.
   • Connect a decoupling capacitor close to the Vcc and GND pins to stabilize the power supply.

2. Clock Configuration:

   • The device can operate with an external crystal or oscillator connected to the designated pins for accurate timing.
   • Alternatively, use the internal oscillator for simpler designs.

3. Programming:

   • Program the flash memory using an appropriate programmer that supports the MB87020PF-G-BND.
   • Refer to the programming manual for specific instructions on setting up the development environment.

4. Communication Interface Setup:

   • Configure UART, SPI, or I2C interfaces as required by your application.
   • Set up baud rates, data bits, parity, and stop bits for UART communication.

5. ADC Operation:

   • Initialize the ADC module before use.
   • Select the desired ADC channel and configure the resolution and reference voltage.

6. Timer and Watchdog Timer:

   • Configure timers for delay generation, PWM output, or counting applications.
   • Enable the watchdog timer to reset the microcontroller if it becomes unresponsive.

7. I/O Pin Configuration:

   • Set each I/O pin as input or output based on your application needs.
   • Configure pull-up or pull-down resistors as necessary for stable operation.

8. Operating Environment:

   • Ensure the operating temperature remains within -40掳C to +85掳C.
   • Protect the device from excessive humidity and contaminants.

9. Safety Considerations:

   • Follow standard electrical safety guidelines when handling and connecting the device.
   • Avoid short circuits and ensure proper grounding.

For detailed information, refer to the official datasheet and application notes provided by the manufacturer.

(For reference only)