Details

---

BUY MPS-U06 https://www.utsource.net/itm/p/12611184.html

Parameter	Description	Value
Part Number		MPS-U06
Type	USB 3.1 Gen 1 Type-C Connector
Mounting Type	Surface Mount (SMT)
Pin Count	24 Pins
Pitch	0.50 mm
Width	8.40 mm
Height	3.60 mm
Length	11.90 mm
Current Rating	3.0 A (Vbus)
Voltage Rating	20 V (Vbus)
Operating Temp	-40掳C to +85掳C
RoHS Compliant	Yes

Instructions for Use:

1. Handling:

   • Handle the connector with care to avoid damage to the pins and housing.
   • Use appropriate ESD protection to prevent static damage.

2. Mounting:

   • Ensure the PCB is clean and free of contaminants before mounting.
   • Use a reflow soldering process with a temperature profile suitable for the component.
   • Verify the correct orientation of the connector before soldering.

3. Soldering:

   • Preheat the PCB to 120掳C to 150掳C.
   • Apply solder paste to the pads using a stencil or syringe.
   • Place the connector on the PCB and align it properly.
   • Reflow solder at a peak temperature of 230掳C to 250掳C.
   • Inspect the solder joints for quality and continuity.

4. Testing:

   • Perform visual inspection to ensure all pins are properly soldered.
   • Use a multimeter to check for continuity between the pins and the corresponding PCB traces.
   • Test the functionality of the USB connection using a compatible device.

5. Storage:

   • Store the connectors in a dry, cool place to prevent oxidation and damage.
   • Keep them in their original packaging until ready for use.

6. Compliance:

   • Ensure that the product complies with all relevant safety and regulatory standards.
   • Refer to the datasheet for detailed compliance information.

7. Disposal:

   • Dispose of the connector according to local environmental regulations.
   • Recycle where possible.

(For reference only)