Details

---

BUY YH5092 https://www.utsource.net/itm/p/12611195.html

Parameter	Description	Value
Part Number	YH5092
Type	Hall Effect Sensor
Operating Voltage (Vcc)	Supply Voltage Range	4.5V to 24V
Output Type	Open Collector
Output Current	Maximum Output Current	20mA
Sensitivity	Magnetic Field Sensitivity	-100 Gauss to -300 Gauss
Response Time	Typical Response Time	100 渭s
Operating Temperature	Temperature Range for Operation	-40掳C to 85掳C
Storage Temperature	Temperature Range for Storage	-40掳C to 125掳C
Package Type	TO-92
Polarity	Bipolar
Quiescent Current	Typical Quiescent Current	10 渭A
Output State	Active Low

Instructions for Use

1. Power Supply:

   • Connect the Vcc pin to a power supply within the range of 4.5V to 24V.
   • Connect the GND pin to the ground of the power supply.

2. Output Connection:

   • The output is an open collector, so connect a pull-up resistor between the output pin and Vcc.
   • The typical value for the pull-up resistor is 1k惟 to 10k惟.

3. Magnetic Field Sensing:

   • Place the sensor in the magnetic field you wish to detect.
   • The sensor will switch its output to low when the magnetic field strength exceeds the sensitivity threshold (-100 Gauss to -300 Gauss).

4. Response Time:

   • The sensor has a typical response time of 100 渭s, which means it can detect changes in the magnetic field quickly.

5. Temperature Considerations:

   • Ensure the operating temperature is within the range of -40掳C to 85掳C for reliable operation.
   • Store the sensor in a temperature range of -40掳C to 125掳C.

6. Handling:

   • Handle the sensor with care to avoid damage.
   • Avoid exposing the sensor to excessive mechanical stress or humidity.

7. Testing:

   • To test the sensor, apply a known magnetic field and check the output state using a multimeter or an oscilloscope.

By following these instructions, you can ensure optimal performance and longevity of the YH5092 Hall Effect Sensor.

(For reference only)