Details

---

BUY 2SB1391-E https://www.utsource.net/itm/p/12611201.html

Parameter	Symbol	Min	Typical	Max	Unit	Condition
Collector-Emitter Voltage	VCEO	-	-	100	V	IC = 0, TA = 25°C
Emitter-Base Voltage	VEBO	-	-	5	V	IE = 0, TA = 25°C
Base-Emitter Voltage	VBE	-	1.2	-	V	IC = 500 mA, TA = 25°C
Collector Current	IC	-	-	500	mA	VCE = 100 V, TA = 25°C
Base Current	IB	-	-	50	mA	VCE = 100 V, TA = 25°C
DC Current Gain	hFE	20	70	200	-	IC = 500 mA, VCE = 10 V, TA = 25°C
Transition Frequency	fT	-	15	-	MHz	IC = 10 mA, VCE = 10 V, TA = 25°C
Storage Temperature Range	TSTG	-55	-	150	°C	-
Operating Temperature Range	TOP	-55	-	150	°C	-

Instructions for Use:

1. Handling Precautions:

   • Handle the 2SB1391-E with care to avoid damage.
   • Use appropriate ESD (Electrostatic Discharge) protection when handling the component.

2. Mounting:

   • Ensure proper alignment of the leads during soldering.
   • Avoid excessive heat during soldering to prevent damage to the transistor. Recommended soldering temperature is 260°C for no more than 10 seconds.

3. Biasing:

   • Ensure that the base-emitter voltage (V_BE) does not exceed the maximum rating.
   • The collector-emitter voltage (V_CE) should be kept within the specified limits to avoid breakdown.

4. Power Dissipation:

   • Calculate the power dissipation (P_D) using the formula P_D = V_CE × I_C.
   • Ensure that the power dissipation does not exceed the maximum allowable value for the given operating conditions.

5. Thermal Management:

   • If the transistor is expected to operate at high power levels, consider using a heatsink to manage thermal dissipation.
   • Monitor the junction temperature (T_J) to ensure it remains within safe limits.

6. Storage:

   • Store the 2SB1391-E in a dry, cool place to prevent moisture damage.
   • Keep the components in their original packaging until ready for use.

7. Testing:

   • Before installing the transistor in a circuit, test its parameters using a multimeter or a dedicated transistor tester to ensure it meets the specifications.

8. Compliance:

   • Ensure that the application complies with all relevant safety and regulatory standards.

(For reference only)