Details

---

BUY S1375 https://www.utsource.net/itm/p/12611223.html

Parameter	Description	Value
Part Number	S1375	-
Type	Silicon Epitaxial Planar NPN Transistor	-
Package	TO-92	-
Collector-Emitter Voltage (Vceo)	Maximum Collector-Emitter Voltage	50 V
Emitter-Base Voltage (Veb)	Maximum Emitter-Base Voltage	6.0 V
Collector Current (Ic)	Continuous Collector Current	150 mA
Power Dissipation (Ptot)	Total Power Dissipation	625 mW (at 25掳C)
Storage Temperature (Tstg)	Storage Temperature Range	-65掳C to +150掳C
Operating Temperature (Tamb)	Operating Ambient Temperature	-65掳C to +150掳C
Current Gain (hFE)	DC Current Gain	100 to 300 (at Ic = 10 mA)
Transition Frequency (ft)	Transition Frequency	300 MHz
Saturation Voltage (Vce(sat))	Collector-Emitter Saturation Voltage	0.2 V (at Ic = 150 mA, Ib = 15 mA)
Storage Diode Reverse Current (Ir)	Storage Diode Reverse Current	100 nA (at 25掳C)

Instructions for Use:

1. Handling Precautions:

   • Handle the S1375 with care to avoid static discharge, which can damage the transistor.
   • Use appropriate tools and techniques to prevent mechanical stress on the leads.

2. Mounting:

   • Ensure that the leads are bent carefully to avoid damaging the internal connections.
   • Use a heat sink if the power dissipation exceeds the limits of the TO-92 package.

3. Soldering:

   • Solder the leads at a temperature not exceeding 260掳C for no more than 10 seconds per lead.
   • Allow the device to cool down before handling or testing.

4. Circuit Design:

   • Ensure that the operating conditions do not exceed the maximum ratings provided in the table.
   • Use appropriate decoupling capacitors to stabilize the power supply and reduce noise.

5. Testing:

   • Test the device under controlled conditions to ensure it meets the specified parameters.
   • Use a multimeter or a transistor tester to verify the functionality of the S1375.

6. Storage:

   • Store the S1375 in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the device in its original packaging until ready for use to protect against static damage.

7. Disposal:

   • Dispose of the S1375 according to local regulations for electronic waste.

(For reference only)