Details

---

BUY SN74LS06DB https://www.utsource.net/itm/p/12611226.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	VCC	Continuous Operation	4.75	-	5.25	V
Input Low Voltage	VIL	IL = 1.6 mA	0.8	-	-	V
Input High Voltage	VIH	IH = -0.4 mA	-	-	2.0	V
Output Low Voltage	VOL	IOL = 16 mA	0.25	-	-	V
Output High Voltage	VOH	IOH = -0.4 mA	-	-	2.4	V
Propagation Delay Time	tpd	VCC = 5V, TA = 25掳C	-	15	22	ns
Power Dissipation	PD	Per Package (TA = 25掳C)	-	-	500	mW
Operating Temperature	TA	-	-40	-	85	掳C
Storage Temperature	TSTG	-	-65	-	150	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.75V to 5.25V to avoid damage to the device.

2. Input Levels:

   • For a valid low input (V_IL), the voltage should be below 0.8V.
   • For a valid high input (V_IH), the voltage should be above 2.0V.

3. Output Levels:

   • The output low voltage (V_OL) should not exceed 0.25V when sourcing 16 mA.
   • The output high voltage (V_OH) should be at least 2.4V when sinking -0.4 mA.

4. Propagation Delay:

   • The typical propagation delay time (t_pd) is 15 ns at 25掳C and 5V supply voltage, with a maximum of 22 ns.

5. Power Dissipation:

   • The maximum power dissipation per package is 500 mW at 25掳C ambient temperature.

6. Temperature Ranges:

   • The operating temperature range (T_A) is from -40掳C to 85掳C.
   • The storage temperature range (T_STG) is from -65掳C to 150掳C.

7. Handling:

   • Handle the device with care to avoid static damage. Use proper ESD protection measures.
   • Avoid exposing the device to excessive heat or moisture.

8. Mounting:

   • Ensure proper mounting on a PCB with adequate heat dissipation if necessary.
   • Follow the recommended footprint and soldering guidelines provided by the manufacturer.

9. Testing:

   • Test the device under specified conditions to ensure it meets the required performance parameters.

10. Compliance:

    • Ensure the device complies with all relevant safety and regulatory standards for your application.

(For reference only)