Details

---

BUY C4550A https://www.utsource.net/itm/p/12611234.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	2.0	5.0	6.0	V
Output Current	Iout	-	100	150	mA
Operating Temperature	Toper	-40	-	85	掳C
Storage Temperature	Tstg	-65	-	150	掳C
Input Voltage Range	Vin	0	-	Vcc	V
Output Voltage Swing	Vos	0.1	-	Vcc-0.1	V
Quiescent Current	Iq	-	1.0	2.0	mA
Propagation Delay Time	tpd	10	35	100	ns
Power Dissipation	Pd	-	-	625	mW

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.0V to 6.0V.
   • Connect the power supply to the Vcc pin and ground to the GND pin.

2. Input Signals:

   • Apply input signals to the input pins within the range of 0V to Vcc.
   • Avoid applying voltages outside this range to prevent damage to the device.

3. Output Configuration:

   • The output can source or sink up to 150mA of current.
   • Ensure the load connected to the output does not exceed the maximum current rating.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C.
   • Store the device within the temperature range of -65掳C to 150掳C.

5. Quiescent Current:

   • The quiescent current (Iq) is typically around 1.0mA but can go up to 2.0mA.
   • This should be considered in low-power applications.

6. Propagation Delay:

   • The propagation delay time (tpd) ranges from 10ns to 100ns.
   • This is important for timing considerations in high-speed circuits.

7. Power Dissipation:

   • The maximum power dissipation (Pd) is 625mW.
   • Ensure proper heat sinking if operating near the maximum power dissipation to avoid overheating.

8. Handling:

   • Handle the device with care to avoid static discharge which can damage sensitive components.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

(For reference only)