Details

---

BUY XP6501-(TX) https://www.utsource.net/itm/p/12611249.html

Parameter	Description	Value
Part Number	Full part identification	XP6501-(TX)
Package Type	Package style	SOP-8
Operating Voltage (VDD)	Supply voltage range	2.7V to 5.5V
Output Current (IOUT)	Maximum continuous output current	3A
Switching Frequency	Internal oscillator frequency	1.2MHz
Feedback Voltage (VFB)	Reference voltage for feedback loop	0.8V
Quiescent Current (IQ)	Current consumption in operation	90渭A
Shutdown Current (ISD)	Current consumption in shutdown	<1渭A
Thermal Shutdown Temperature	Protection threshold	160掳C
Overcurrent Protection	OCP trip point	Adjustable via resistor
Protection Features	Included safety features	Overcurrent, Thermal
Operating Temperature Range	Ambient temperature range	-40掳C to +85掳C

Instructions:

1. Power Supply Connection: Connect the input voltage (VDD) within the specified range of 2.7V to 5.5V.
2. Output Configuration: Ensure the load does not exceed the maximum output current of 3A. Adjust the feedback resistor for desired output voltage.
3. Thermal Management: Ensure adequate heat dissipation to prevent exceeding the thermal shutdown temperature of 160掳C.
4. Shutdown Mode: Use the enable pin to put the device into a low-power shutdown mode, reducing current draw to less than 1渭A.
5. Protection Settings: Verify that overcurrent and thermal protection settings are appropriate for your application.
6. Layout Considerations: Follow recommended PCB layout guidelines to minimize noise and improve performance.
7. Component Selection: Choose external components such as capacitors and inductors based on the switching frequency and output requirements.

For detailed design considerations and application circuits, refer to the datasheet or technical documentation provided by the manufacturer.

(For reference only)