Details

---

BUY AZ8-1CH-24DSE https://www.utsource.net/itm/p/12611265.html

Parameter	Description
Part Number	AZ8-1CH-24DSE
Type	Relay Module
Input Voltage	24V DC
Coil Power Consumption	0.5W (nominal)
Contact Form	SPDT (Single Pole Double Throw)
Switching Voltage	Max 250V AC / 30V DC
Switching Current	Max 10A
Insulation Resistance	>100M惟 at 500V DC
Dielectric Strength	2500V AC for 1 minute
Mechanical Life	10 million operations
Electrical Life	100,000 operations (resistive load)
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +85掳C
Humidity Range	5% to 95% RH (non-condensing)
Dimensions	37mm x 22mm x 26mm
Weight	Approx. 50g
Mounting	PCB mount or panel mount
Certifications	CE, UL

Instructions:

1. Installation:

   • Ensure the relay is installed in a well-ventilated area within specified temperature and humidity ranges.
   • Securely mount the relay using recommended mounting methods.

2. Wiring:

   • Connect the control circuit to the coil terminals ensuring the correct polarity.
   • Wire the load to the common (COM), normally open (NO), and normally closed (NC) contacts as required by your application.

3. Operation:

   • Apply the rated input voltage to energize the coil, which will switch the contacts.
   • Verify that the switching capacity of the relay matches the load requirements to avoid damage.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Ensure connections are tight and free from corrosion.

5. Safety Precautions:

   • Do not exceed the maximum switching voltage and current ratings.
   • Handle with care to prevent mechanical damage.
   • Disconnect power before performing any maintenance or installation tasks.

(For reference only)