Details

---

BUY LM239AQDRG4Q1 https://www.utsource.net/itm/p/12611266.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc		2.0		36	V
Input Offset Voltage	Vios		-0.5		+0.5	mV
Input Bias Current	Iib		20		100	nA
Input Voltage Range	Vin	Common Mode	Vee-0.3		Vcc+0.3	V
Output Short-Circuit		Continuous		Yes
Output Low Level	Vol	RL=2k惟	0.08		0.4	V
Output High Level	VoH	RL=2k惟, C=0pF	Vcc-0.7		Vcc-0.1	V
Slew Rate	SR		0.3		0.5	V/渭s
Power Consumption	Ptot	All Outputs High		9		mW
Operating Temperature	Temp		-40		125	掳C

Instructions for LM239AQDRG4Q1:

1. Power Supply: Ensure the supply voltage (Vcc) is within the range of 2.0V to 36V. The device can operate over a wide range but must not exceed these limits.

2. Input Signals: Keep input signals within the common-mode input voltage range to avoid damage or incorrect operation. This range is from Vee-0.3V to Vcc+0.3V.

3. Output Load: For optimal performance, connect a load resistor (RL) of 2k惟 when testing output levels. Ensure the output does not remain short-circuited for extended periods.

4. Temperature Considerations: Operate the device within the temperature range of -40掳C to 125掳C. Outside this range, performance and reliability are not guaranteed.

5. Handling Electrostatic Discharge (ESD): The device is sensitive to ESD; handle with appropriate precautions to prevent damage.

6. Mounting and Storage: Store in a dry environment and mount on a PCB following standard practices to ensure thermal and electrical performance.

7. Testing and Troubleshooting: Refer to the datasheet for detailed test conditions and troubleshooting tips if the device does not perform as expected.

(For reference only)