Details

---

BUY BTB24-800 https://www.utsource.net/itm/p/12611270.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Repetitive Peak Off-State Voltage	VDRM	-	800	-	V	Tj = 25°C
Repetitive Peak Reverse Voltage	VRRM	-	800	-	V	Tj = 25°C
Non-Repetitive Peak Off-State Voltage	VDSM	-	1000	-	V	Tj = 25°C, Pulse Width ≤ 10 ms
RMS On-State Current (at case temperature)	IT(RMS)	-	-	24	A	Tc = 70°C
Average Rectified Output Current	IOTAV	-	-	24	A	Tc = 70°C, f = 50 Hz
Peak Recurrent On-State Current	ITSM	-	300	-	A	Tj = 25°C, Pulse Width ≤ 10 ms
Turn-On Time	ton	-	0.6	-	μs	di/dt = 10 A/μs
Turn-Off Time	toff	-	1.2	-	μs	di/dt = 10 A/μs
Gate Trigger Voltage	VGT	1.5	-	3	V	IG = ±1 mA, Tj = 25°C
Gate Trigger Current	IG(T)	10	-	50	mA	VGT = 2.5 V, Tj = 25°C
Holding Current	IH	-	5	-	mA	Tj = 25°C
Junction-to-Case Thermal Resistance	RθJC	-	0.9	-	°C/W	-

Instructions for BTB24-800:

1. Voltage Ratings:

   • Ensure that the operating voltage does not exceed the repetitive peak off-state voltage (VDRM/VRRM) and non-repetitive peak off-state voltage (VDSM).

2. Current Handling:

   • The device should not be operated beyond its RMS on-state current (IT(RMS)) or average rectified output current (IOTAV) ratings.
   • For transient conditions, observe the peak recurrent on-state current (ITSM) limits.

3. Switching Characteristics:

   • Pay attention to the turn-on (ton) and turn-off (toff) times when designing switching circuits.
   • Use appropriate gate trigger voltage (VGT) and gate trigger current (IG(T)) values for reliable operation.

4. Thermal Management:

   • Maintain the junction-to-case thermal resistance (RθJC) within specified limits to ensure proper heat dissipation.

5. Installation and Handling:

   • Handle with care to avoid damage to the sensitive components.
   • Follow manufacturer guidelines for mounting and connections.

6. Storage and Operating Temperature:

   • Store in a dry environment and operate within the recommended temperature range to prevent degradation of performance.

For detailed application-specific information, refer to the datasheet provided by the manufacturer.

(For reference only)