Details

---

BUY MXP4004BTS https://www.utsource.net/itm/p/12611276.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	1.7	3.6	5.5	V
Supply Current	IDD	Operating, no load	-	220	-	μA
Output Current	IOUT	Continuous	-	20	50	mA
Output Voltage	VOUT	No load	0.4	-	4.8	V
Temperature Range	Toper	Operating	-40	-	85	°C
Pressure Sensitivity	PS	1 kPa	-	0.1	-	% FS
Frequency Response	f-3dB	Bandwidth	-	10	-	Hz
Response Time	τ	Step Response	-	100	-	ms
Non-Linearity	NL	Full Scale	-	1	-	%
Hysteresis	HYST	Differential	-	0.5	-	% FS
Long Term Stability	LTS	1 year	-	0.5	-	% FS/yr

Instructions for Using MXP4004BTS

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 1.7V to 5.5V.
   • The typical operating current (IDD) is 220 μA.

2. Output Configuration:

   • The output voltage (VOUT) ranges from 0.4V to 4.8V under no load conditions.
   • The maximum continuous output current (IOUT) is 50 mA, with a typical value of 20 mA.

3. Environmental Considerations:

   • The operating temperature range (Toper) is from -40°C to 85°C.
   • The sensor has a pressure sensitivity (PS) of 0.1% FS per 1 kPa.

4. Performance Parameters:

   • The frequency response (f-3dB) is typically 10 Hz.
   • The response time (τ) for a step input is approximately 100 ms.
   • The non-linearity (NL) is typically 1% of full scale.
   • The hysteresis (HYST) is typically 0.5% of full scale.
   • The long-term stability (LTS) is 0.5% FS per year.

5. Handling and Installation:

   • Handle the sensor with care to avoid damage.
   • Ensure proper grounding and shielding to minimize noise interference.
   • Mount the sensor in a stable and secure position to avoid mechanical stress.

6. Calibration:

   • Periodic calibration may be necessary to maintain accuracy, especially if the sensor is used in harsh environments or over extended periods.

7. Troubleshooting:

   • If the output is not as expected, check the power supply, connections, and environmental conditions.
   • Refer to the datasheet for more detailed troubleshooting steps and contact the manufacturer for further assistance.

(For reference only)