Details

---

BUY MB2013A-2 https://www.utsource.net/itm/p/12611286.html

Parameter	Description
Part Number	MB2013A-2
Type	MOSFET Bridge Rectifier
Configuration	Full-Wave Bridge Rectifier
Input Voltage (V)	400 V
Output Current (I)	15 A
Reverse Voltage (VR)	400 V
Forward Voltage (VF)	1.2 V (Typical at 15 A)
Power Dissipation (P)	18 W (Maximum at 25掳C ambient temperature)
Operating Temperature	-40掳C to +150掳C
Storage Temperature	-65掳C to +150掳C
Package Type	TO-220-4L
Mounting Style	Through-Hole
Lead Finish	Tin (Sn)

Instructions for Use

1. Mounting:

   • Ensure the PCB layout provides sufficient space for heat dissipation.
   • Use a heatsink if continuous high current operation is expected.
   • Secure the component with a torque of 0.5 to 1.5 Nm to avoid mechanical stress.

2. Electrical Connections:

   • Connect the input AC voltage to the terminals marked "AC1" and "AC2".
   • Connect the output DC voltage to the terminals marked "+" and "-".

3. Thermal Management:

   • Ensure proper ventilation to maintain the operating temperature within the specified range.
   • Use thermal paste between the component and the heatsink for better thermal conductivity.

4. Handling:

   • Handle the component with care to avoid damage to the leads.
   • Avoid exposing the component to excessive moisture or corrosive environments.

5. Testing:

   • Before final assembly, test the rectifier using a known good power supply to ensure it meets the specifications.
   • Monitor the temperature during testing to ensure it does not exceed the maximum operating temperature.

6. Storage:

   • Store the component in a dry, cool place to prevent oxidation and degradation.
   • Keep the component in its original packaging until ready for use.

(For reference only)