Details

---

BUY ACT4070BYH https://www.utsource.net/itm/p/12611292.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	1.6	-	5.5	V
Input Low Voltage	VIL		0	-	0.8	V
Input High Voltage	VIH		2.0	-	VDD	V
Output Low Voltage	VOL	IO = 4mA	0	0.1	0.4	V
Output High Voltage	VOH	IO = -4mA	VDD-0.4	VDD-0.1	VDD	V
Propagation Delay Time	tPLH	VDD=5V, VL=3.5V	-	7	-	ns
Propagation Delay Time	tPHL	VDD=5V, VH=1.5V	-	7	-	ns
Power Dissipation	PD	TA=25掳C	-	10	-	mW

Instructions for ACT4070BYH:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 1.6V to 5.5V for proper operation.

2. Input Levels:

   • For a logic low input, ensure the voltage does not exceed 0.8V.
   • For a logic high input, the voltage should be at least 2.0V and can go up to the supply voltage.

3. Output Levels:

   • When the output is low, it should be less than or equal to 0.4V under a load current of 4mA.
   • When the output is high, it should be at least VDD - 0.4V under a load current of -4mA.

4. Propagation Delay:

   • The typical propagation delay time from low to high (tPLH) and from high to low (tPHL) is 7ns when VDD is 5V.

5. Power Consumption:

   • The power dissipation at room temperature (25掳C) is typically 10mW.

6. Handling Precautions:

   • Avoid exposing the device to voltages outside its specified operating range to prevent damage.
   • Use appropriate decoupling capacitors near the power supply pins to reduce noise and improve stability.

(For reference only)