Details

---

BUY JZC-43F-024-HS(555) https://www.utsource.net/itm/p/12611302.html

Parameter	Value
Type	Relay
Model	JZC-43F-024-HS(555)
Coil Voltage	24VDC
Coil Power Consumption	1.2W
Pick-up Voltage	≤18VDC
Drop-out Voltage	≤4.8VDC
Contact Form	SPDT (Single Pole Double Throw)
Rated Load	250VAC, 10A
Insulation Resistance	>100MΩ at 500VDC
Dielectric Strength	2500VAC for 1 minute
Mechanical Life	10 million operations
Electrical Life	100,000 operations (resistive load)
Operating Temperature	-40°C to +85°C
Storage Temperature	-40°C to +125°C
Humidity	95% RH at 40°C
Weight	15g
Dimensions	17.5mm x 12.5mm x 12.5mm

Instructions:

1. Installation:

   • Ensure the relay is mounted on a flat, stable surface.
   • Use the provided mounting holes or clips for secure attachment.
   • Avoid exposure to high humidity, dust, and corrosive environments.

2. Wiring:

   • Connect the coil terminals to the control circuit using the specified coil voltage.
   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the load circuit according to your application requirements.

3. Operation:

   • Apply the rated coil voltage to energize the relay and switch the contacts.
   • Ensure the load current does not exceed the rated load capacity to avoid damage to the relay contacts.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a dry, soft cloth to remove dust and debris.
   • Do not use abrasive materials or solvents that could damage the relay.

5. Safety:

   • Always disconnect power before performing any maintenance or wiring changes.
   • Follow all local electrical codes and safety guidelines.
   • Use appropriate personal protective equipment (PPE) when handling electrical components.

6. Troubleshooting:

   • If the relay fails to operate, check the coil voltage and connections.
   • If the contacts are sticking, ensure the load is within the rated capacity and there is no excessive vibration.
   • If the relay is making unusual noises, it may be due to mechanical issues; contact the manufacturer for further assistance.

(For reference only)