Details

---

BUY CLY5 https://www.utsource.net/itm/p/12611307.html

Parameter	Description
Part Number	CLY5
Type	Optocoupler
Configuration	Single Channel
Forward Current	IF = 20 mA (Max)
Forward Voltage	VF = 1.6 V (Typical @ IF = 20 mA)
Reverse Voltage	VR = 7 V (Max)
Collector-Emitter Voltage	VCE = 70 V (Max)
Collector Current	IC = 50 mA (Max)
CTR (Current Transfer Ratio)	Min: 20%, Max: 400% @ IF = 5 mA, VCE = 5 V
Operating Temperature	-40掳C to +110掳C
Storage Temperature	-55掳C to +125掳C
Package	DIP-4

Instructions for Use:

1. Handling Precautions: Avoid exposing the device to excessive heat or mechanical stress during soldering and handling.
2. Mounting: Ensure that the mounting orientation follows the pin configuration diagram provided in the datasheet.
3. Electrical Connections: Connect the anode and cathode of the LED correctly to prevent damage. Ensure the collector and emitter connections are correct to avoid short circuits.
4. Operating Limits: Do not exceed the maximum ratings specified in the table to prevent device failure.
5. Storage: Store in a dry, cool place away from direct sunlight and sources of heat.
6. Soldering: Use a temperature-controlled soldering iron and complete soldering within a recommended time to avoid thermal damage.
7. Testing: Before installing into final applications, test the optocoupler using the specified parameters to ensure functionality.

(For reference only)