Details

---

BUY Sn65C1168PWEN4 https://www.utsource.net/itm/p/12611323.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VCC)	Operating voltage range	2.7	-	3.6	V
Operating Temperature	Ambient temperature range for operation	-40	-	85	掳C
Output Current (IOL)	Maximum output current (low level)	-	24	-	mA
Output Current (IOH)	Maximum output current (high level)	-	-12	-	mA
Propagation Delay (tPD)	Time delay from input to output	2.5	4.5	6.5	ns
Skew (tSKEW)	Maximum difference in propagation delay between channels	-	0.5	-	ns
Power Consumption (ICC)	Quiescent current at VCC = 3.3V	0.5	1.5	2.5	mA
Input Voltage (VIH)	High-level input voltage	2.0	-	3.6	V
Input Voltage (VIL)	Low-level input voltage	0.0	-	0.8	V
Input Leakage Current (IIL)	Maximum leakage current at input pins	-1	-	1	渭A
Output Leakage Current (IOL)	Maximum leakage current at output pins (low level)	-1	-	1	渭A
Output Leakage Current (IOH)	Maximum leakage current at output pins (high level)	-1	-	1	渭A

Instructions for Using the SN65C1168PWEN4

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 2.7V to 3.6V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Temperature Considerations:

   • Operate the device within the ambient temperature range of -40掳C to 85掳C.
   • Avoid exposing the device to extreme temperatures outside this range.

3. Output Current:

   • The maximum output current for low-level outputs (IOL) is 24mA.
   • The maximum output current for high-level outputs (IOH) is -12mA.
   • Ensure that the load connected to the outputs does not exceed these limits to prevent damage.

4. Propagation Delay:

   • The propagation delay (tPD) ranges from 2.5ns to 6.5ns, with a typical value of 4.5ns.
   • This delay should be considered when designing timing-critical applications.

5. Skew:

   • The maximum skew (tSKEW) between channels is 0.5ns.
   • This is important for applications requiring synchronized outputs.

6. Power Consumption:

   • The quiescent current (ICC) at VCC = 3.3V is typically 1.5mA, with a minimum of 0.5mA and a maximum of 2.5mA.
   • Ensure that the power supply can handle the total current consumption of all devices on the board.

7. Input Voltage Levels:

   • High-level input voltage (VIH) should be between 2.0V and 3.6V.
   • Low-level input voltage (VIL) should be between 0.0V and 0.8V.
   • Ensure that the input signals meet these levels to avoid incorrect operation.

8. Leakage Current:

   • The maximum input leakage current (IIL) and output leakage current (IOL/IOH) are 卤1渭A.
   • This should be considered when designing circuits with high-impedance inputs or outputs.

9. Handling and Storage:

   • Handle the device with care to avoid static discharge and physical damage.
   • Store the device in a dry, cool environment to prevent moisture damage.

10. Mounting and PCB Design:

    • Follow recommended PCB layout guidelines to ensure proper signal integrity and thermal management.
    • Use appropriate decoupling capacitors near the power pins to filter out noise and provide stable power.

By following these parameters and instructions, you can ensure optimal performance and reliability of the SN65C1168PWEN4 in your application.

(For reference only)