Details

---

BUY HEDS-9140-A00 https://www.utsource.net/itm/p/12611365.html

Parameter	Description
Part Number	HEDS-9140-A00
Type	Incremental Encoder
Resolution	500 CPR (Cycles per Revolution)
Supply Voltage	4.75 V to 5.25 V DC
Output Type	Open Collector
Operating Temperature Range	-25掳C to +85掳C
Storage Temperature Range	-40掳C to +100掳C
Shaft Diameter	6 mm
Shaft Length	12 mm (including hub)
Housing Color	Black
Weight	22 g

Instructions for Use:

1. Power Supply: Ensure the supply voltage is within the specified range of 4.75 V to 5.25 V DC.
2. Installation: Secure the encoder to the mounting surface using the provided hardware. Ensure the shaft aligns with the intended drive mechanism.
3. Connections: Connect the encoder wires as follows:
   • Red: Power (+5V)
   • Black: Ground
   • Yellow: Channel A output
   • White: Channel B output
   • Green: Index channel output (if applicable)
4. Testing: After installation, apply power and verify that the encoder outputs the expected signals on Channels A and B. The index channel should provide a single pulse per revolution if used.
5. Operation: Operate the encoder within the specified temperature ranges to ensure reliable performance.
6. Maintenance: Periodically inspect the encoder and its connections for signs of wear or damage. Clean as necessary using a soft, dry cloth.

(For reference only)