Details

---

BUY 5S4 https://www.utsource.net/itm/p/12611370.html

Parameter	Description
Part Number	5S4
Type	Schottky Diode
Voltage (VR)	40V (Maximum Reverse Voltage)
Current (IF)	5A (Forward Current)
Power Dissipation (PT)	3W (Maximum Power Dissipation)
Forward Voltage (VF)	0.45V (Typical at IF = 1A)
Reverse Recovery Time (trr)	35ns (Maximum)
Operating Temperature Range	-65掳C to +175掳C
Mounting Type	Surface Mount (SMD)
Package Type	TO-252 (DPAK)
Lead Finish	Matte Tin

Instructions for Use

1. Handling and Storage:

   • Handle with care to avoid mechanical damage.
   • Store in a dry, cool place away from direct sunlight and corrosive substances.

2. Mounting:

   • Ensure proper alignment of the diode on the PCB.
   • Use a soldering iron or reflow oven with appropriate temperature settings to avoid thermal shock.
   • Do not exceed the maximum soldering temperature of 260掳C for more than 10 seconds.

3. Electrical Connections:

   • Connect the cathode (marked with a band or symbol) to the positive side of the circuit.
   • Connect the anode to the negative side of the circuit.
   • Ensure that the voltage across the diode does not exceed the maximum reverse voltage (40V).

4. Thermal Management:

   • Provide adequate heat sinking if operating near the maximum current or power dissipation.
   • Ensure good thermal contact between the diode and the heat sink.

5. Testing:

   • Test the diode using a multimeter set to the diode test mode.
   • The diode should show a low resistance in the forward direction and high resistance in the reverse direction.

6. Safety Precautions:

   • Avoid exceeding the maximum ratings specified in the table to prevent damage to the diode.
   • Use appropriate personal protective equipment (PPE) when handling and testing the diode.

(For reference only)