Details

---

BUY 78010AP https://www.utsource.net/itm/p/12611375.html

Parameter	Description	Value
Part Number	Device Part Number	78010AP
Type	Linear Voltage Regulator	-
Output Voltage (Vout)	Fixed Output Voltage	10V
Input Voltage Range (Vin)	Operating Input Voltage Range	12V to 24V
Output Current (Iout)	Continuous Output Current	1A
Quiescent Current (Iq)	Quiescent Current at No Load	5mA
Dropout Voltage (Vdo)	Dropout Voltage at Maximum Load	2V
Operating Temperature (Toper)	Operating Temperature Range	-40掳C to 85掳C
Storage Temperature (Tstg)	Storage Temperature Range	-65掳C to 150掳C
Thermal Resistance (胃ja)	Junction-to-Ambient Thermal Resistance	65掳C/W
Package	Package Type	TO-220
Polarity	Polarity of Input and Output	Positive
Mounting	Mounting Method	Through-Hole

Instructions for Use:

1. Circuit Connection:

   • Connect the input voltage (Vin) to the middle pin.
   • Connect the output voltage (Vout) to the right pin.
   • Ground (GND) should be connected to the left pin.

2. Capacitors:

   • Place a 0.33 渭F ceramic capacitor between the input and ground as close to the regulator as possible.
   • Place a 0.1 渭F ceramic capacitor between the output and ground to stabilize the output voltage.

3. Heat Dissipation:

   • Ensure adequate heat dissipation by using a heatsink if the power dissipation exceeds 1W.
   • The maximum power dissipation (Pd) can be calculated using the formula: ( Pd = (Vin - Vout) times Iout ).

4. Input Voltage:

   • Ensure the input voltage is within the specified range to avoid damage to the regulator.

5. Output Load:

   • Do not exceed the maximum continuous output current of 1A to prevent overheating and potential failure.

6. Storage and Handling:

   • Store the device in a dry, cool place within the specified storage temperature range.
   • Handle with care to avoid mechanical stress or damage to the pins.

7. Testing:

   • Before connecting to the final circuit, test the regulator with a known load to ensure it meets the required specifications.

8. Safety:

   • Always follow proper electrical safety guidelines when working with circuits and components.

(For reference only)