Details

---

BUY 60T65PES https://www.utsource.net/itm/p/12611380.html

Parameter	Symbol	Min	Typ	Max	Unit
Rated Voltage	VRMS	-	650	-	V
Peak Repetitive Reverse Voltage	VRRM	-	900	-	V
Continuous Forward Current (Tc = 25掳C)	IF	-	60	-	A
Continuous Forward Current (Tc = 75掳C)	IF	-	45	-	A
Non-repetitive Peak Surge Current (8.3/400渭s)	IFSM	-	300	-	A
Junction Temperature	TJ	-	-	175	掳C
Storage Temperature	TSTG	-55	-	150	掳C
Operating Temperature	TA	-55	-	150	掳C
Forward Voltage at Rated Current	VF	-	1.1	-	V
Reverse Recovery Time	trr	-	35	-	ns
Reverse Recovery Charge	Qrr	-	120	-	nC

Instructions for Use:

1. Mounting and Handling:

   • Handle the device with care to avoid mechanical stress.
   • Ensure proper heat sinking to maintain the junction temperature within the specified limits.

2. Electrical Connections:

   • Connect the device according to the circuit diagram provided.
   • Use appropriate wire gauges to handle the rated current without excessive resistance.

3. Thermal Management:

   • Ensure adequate cooling to keep the junction temperature below 175掳C.
   • Consider forced air cooling or heat sinks for high-power applications.

4. Surge Current:

   • The device can handle non-repetitive peak surge currents up to 300A for 8.3/400渭s pulses.
   • Ensure that the surge current does not exceed this limit to prevent damage.

5. Storage and Operating Temperature:

   • Store the device in a dry environment between -55掳C and 150掳C.
   • Operate the device within the same temperature range to ensure reliable performance.

6. Reverse Recovery:

   • Be aware of the reverse recovery time (35ns) and charge (120nC) when designing the circuit to avoid excessive voltage spikes during switching.

7. Forward Voltage:

   • The forward voltage drop is typically 1.1V at the rated current. Design the power supply and circuit to accommodate this voltage drop.

8. Safety Precautions:

   • Always follow safety guidelines and use protective equipment when handling high-voltage components.
   • Ensure proper insulation and grounding to prevent electrical hazards.

(For reference only)