Details

---

BUY GWA80H65DFB https://www.utsource.net/itm/p/12611381.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating Condition	80	-	100	VDC
Output Voltage	VOUT	Steady State	65	-	-	VDC
Output Current	IOUT	Continuous Mode	-	2.5	3.0	A
Efficiency	畏	Full Load	-	92	-	%
Switching Frequency	fSW	Normal Operation	-	100	-	kHz
Power Factor	PF	Full Load	-	0.95	-	-
Ripple Voltage	VRIP	Output	-	100	-	mVp-p
Temperature Range	TAMB	Operating	-40	-	85	掳C

Instructions for GWA80H65DFB:

1. Installation:

   • Ensure the device is installed in a well-ventilated area to prevent overheating.
   • Use appropriate mounting hardware to secure the module.

2. Power-Up Sequence:

   • Apply the input voltage (VIN) gradually to avoid inrush currents.
   • Confirm that the output voltage (VOUT) stabilizes at the rated value before connecting the load.

3. Operating Conditions:

   • Do not exceed the maximum input voltage or output current ratings.
   • Monitor the temperature of the device, especially under full load conditions.

4. Maintenance:

   • Regularly inspect connections and mounting points for signs of wear or corrosion.
   • Ensure that the cooling system (if applicable) is functioning properly.

5. Troubleshooting:

   • If the output voltage is unstable, check the input voltage and load conditions.
   • Verify all connections are secure if the device does not start or shuts down unexpectedly.

6. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Recycle where possible to minimize environmental impact.

(For reference only)