Details

---

BUY SN75176AD https://www.utsource.net/itm/p/12611404.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC		4.75	5.0	5.25	V
Differential Input Voltage	VID		-0.3		6.0	V
Common-Mode Input Voltage	VICR		-7		12	V
Output High Voltage	VOH	IO = -4 mA	2.4		5.0	V
Output Low Voltage	VOL	IO = 16 mA	0.4		0.8	V
Input Current	II	VI = 0 V, VCC = 5 V	-1		1	渭A
Output Current	IO	VI = 0 V, VCC = 5 V	-16		16	mA
Power Dissipation	PD				350	mW
Operating Temperature Range	Toper		-40		85	掳C
Storage Temperature Range	Tstg		-65		150	掳C

Instructions for Using SN75176AD

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 4.75 V to 5.25 V.
   • Connect the ground (GND) pin to a stable reference point.

2. Signal Levels:

   • The differential input voltage (VID) should not exceed the limits of -0.3 V to 6.0 V.
   • The common-mode input voltage (VICR) should be within the range of -7 V to 12 V.

3. Output Voltage:

   • The output high voltage (VOH) should be at least 2.4 V when sourcing 4 mA.
   • The output low voltage (VOL) should be no more than 0.8 V when sinking 16 mA.

4. Current Limits:

   • The input current (II) should be within 卤1 渭A.
   • The output current (IO) should be within 卤16 mA.

5. Power Dissipation:

   • Ensure that the power dissipation (PD) does not exceed 350 mW to avoid overheating.

6. Temperature Ranges:

   • The operating temperature range (Toper) is from -40 掳C to 85 掳C.
   • The storage temperature range (Tstg) is from -65 掳C to 150 掳C.

7. Handling:

   • Handle the device with care to avoid static damage.
   • Use appropriate ESD protection measures during handling and installation.

8. Circuit Design:

   • Use decoupling capacitors close to the power supply pins to minimize noise.
   • Ensure proper termination of the differential lines to prevent signal reflections.

9. Testing:

   • Test the device under typical operating conditions to ensure it meets the specified performance parameters.

10. Documentation:

    • Refer to the datasheet for detailed information on pin configurations, timing diagrams, and application notes.

(For reference only)