Details

---

BUY TOSHIBA TLP250H(F) https://www.utsource.net/itm/p/12611433.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 10 mA	1.1	1.3	1.5	V
Reverse Breakdown Voltage	VBR	IR = 1 mA	5	-	7	V
Forward Current	IF	VR = 0 V	-	15	-	mA
Reverse Current	IR	VR = VBR	-	1	-	mA
Output Collector-Emitter	VCEO(s)	IC = 500 mA, TOPR = 25°C	-	30	-	V
Output Collector Current	ICM	VCES = 5 V, tW = 1 ms	-	1.5	-	A
Propagation Delay Time	tpLH	VINL → VIH, VOH = 1.4 V	-	1	2	μs
Propagation Delay Time	tpHL	VINH → VIL, VOL = 0.4 V	-	1	2	μs
Power Dissipation	PD	Ta = 25°C	-	625	-	mW
Operating Temperature	TOPR		-40	-	105	°C

Instructions for TOSHIBA TLP250H(F):

1. Mounting and Handling:

   • Ensure proper handling to avoid damage due to electrostatic discharge (ESD).
   • Use appropriate tools and follow anti-static procedures.

2. Power Supply Connection:

   • Connect the power supply ensuring correct polarity.
   • Ensure the power supply voltage is within the specified limits to prevent damage.

3. Input Signal:

   • Apply input signals within the rated forward current (IF) and ensure reverse voltage does not exceed the breakdown voltage (VBR).

4. Output Load:

   • Connect the load to the output terminals ensuring the collector-emitter voltage (VCEO) and collector current (ICM) are within the specified limits.

5. Heat Management:

   • Consider heat dissipation requirements, especially when operating near maximum power dissipation (PD). Use heatsinks if necessary.

6. Operating Temperature:

   • Operate the device within the specified temperature range (-40°C to +105°C) to ensure reliable performance.

7. Propagation Delay:

   • Account for propagation delay times in system timing design to ensure accurate operation.

8. Storage:

   • Store in a dry, cool place away from direct sunlight and sources of heat.

(For reference only)