Details

---

BUY FL1100-1Q0 https://www.utsource.net/itm/p/12611436.html

Parameter	Description	Value	Unit
Part Number	Device Identifier	FL1100-1Q0	-
Type	Device Type	LED Driver	-
Input Voltage	Operating Voltage Range	90 to 305	VAC
Output Current	Constant Current Output	1000	mA
Efficiency	Conversion Efficiency	87%	-
Power Factor	Power Factor at Full Load	>0.9	-
Operating Frequency	Switching Frequency	65	kHz
Protection Features	Overvoltage, Overcurrent, Short Circuit, Thermal	Yes	-
Operating Temperature	Ambient Temperature Range	-20 to +60	掳C
Storage Temperature	Storage Temperature Range	-40 to +85	掳C
Dimensions	Length x Width x Height	70 x 35 x 20	mm
Weight	Device Weight	50	g

Instructions:

1. Installation:

   • Ensure the input voltage is within the specified range (90 to 305 VAC).
   • Connect the positive and negative leads of the LED load to the output terminals of the driver.
   • Secure the driver in a well-ventilated area to prevent overheating.

2. Operation:

   • Turn on the power supply to start the LED operation.
   • Monitor the temperature and ensure it remains within the operating range (-20 to +60掳C).

3. Maintenance:

   • Regularly check for any signs of damage or wear.
   • Clean the driver with a dry cloth to remove dust and debris.
   • If the driver fails to operate, disconnect the power and check all connections.

4. Troubleshooting:

   • No Output: Check input voltage and connections.
   • Overheating: Ensure proper ventilation and ambient temperature.
   • Flashing LEDs: Check for overvoltage or overcurrent conditions.

5. Storage:

   • Store the driver in a dry place with temperatures between -40 and +85掳C.
   • Avoid exposure to extreme humidity and direct sunlight.

6. Safety:

   • Do not open the driver casing as it contains high-voltage components.
   • Follow all local electrical codes and regulations during installation.

(For reference only)