Details

---

BUY LM3876T https://www.utsource.net/itm/p/12611444.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Continuous operation	25	-	60	V
Quiescent Current	IQ	No load	-	100	-	mA
Output Power	POUT	8惟, THD = 1%	-	50	-	W
Efficiency	畏	8惟, 1kHz	-	75	-	%
Signal-to-Noise Ratio	SNR	A-weighted	-	95	-	dB
Total Harmonic Distortion	THD	1kHz, 1W, 8惟	-	0.05	-	%
Input Sensitivity	VIN	1kHz, 1W, 8惟	-	400	-	mV
Input Impedance	ZIN	1kHz	-	10	-	k惟
Thermal Shutdown	TSD	-	-	150	-	掳C

Instructions for Use

1. Supply Voltage:

   • Ensure the supply voltage is within the range of 25V to 60V for continuous operation.
   • Use a well-regulated power supply to avoid voltage fluctuations that can affect performance.

2. Quiescent Current:

   • The quiescent current is typically 100mA with no load. This value should be considered when designing the power supply.

3. Output Power:

   • The LM3876T can deliver up to 50W into an 8惟 load with less than 1% THD (Total Harmonic Distortion).
   • For optimal performance, ensure proper heat dissipation.

4. Efficiency:

   • The efficiency at 8惟 and 1kHz is approximately 75%. This indicates that about 25% of the input power is lost as heat.

5. Signal-to-Noise Ratio:

   • The A-weighted signal-to-noise ratio is 95dB, indicating a high level of audio clarity.

6. Total Harmonic Distortion:

   • At 1kHz and 1W output into an 8惟 load, the THD is 0.05%, which is very low and ensures high-quality audio reproduction.

7. Input Sensitivity:

   • The input sensitivity is 400mV at 1kHz for 1W output into an 8惟 load. Adjust the input signal accordingly to achieve the desired output level.

8. Input Impedance:

   • The input impedance is 10k惟 at 1kHz. This high impedance allows for easy interfacing with various audio sources.

9. Thermal Shutdown:

   • The thermal shutdown temperature is 150掳C. Ensure adequate cooling to prevent the device from overheating and triggering thermal shutdown.

10. Mounting and Layout:

    • Use a heatsink with sufficient surface area to dissipate heat effectively.
    • Place the LM3876T away from other heat-generating components to avoid thermal buildup.
    • Use short, wide traces for power and ground connections to minimize inductance and resistance.

11. Capacitors:

    • Use bypass capacitors (e.g., 100nF and 10渭F) close to the power pins to filter out noise and stabilize the supply voltage.

12. Protection Circuits:

    • Implement protection circuits such as overcurrent and short-circuit protection to safeguard the amplifier.

13. Testing:

    • Before finalizing the design, test the amplifier with a known load and signal source to ensure it meets the required specifications.

By following these guidelines, you can ensure reliable and efficient operation of the LM3876T audio amplifier.

(For reference only)